EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
93
7.15.3
Performing a Reset
Via menu
Reset
, the system manager can make the system start the
system setup.
Caution
System specific settings, those involving hardware
and users included, are deleted by resetting the
system. After a Reset, the lock master alone may be
able to open locks.
Save the current configuration with the help of the optional
PC software or have it saved before carrying out a reset.
1.
Unlock the system by opening lock 1 or by opening all locks.
See paragraph ‘System State’
on page 50.
2.
With key
<
or key
>
select
Service
and press key
Enter
.
Service | Reset
is on display.
3.
Confirm with
Enter
.
Code entry | System manager
,
0123456789
, as the case may be, and
Code
are on display.
4.
Enter the system manager code.
System manager
and
Terminal
are on display. Choose whether to reset the
complete system with
Terminal
or whether to reset a lock with Lock.
5.
Confirm with Enter or select
Lock
and Enter and
Lock 1
or
Lock 2
, as it may
be, and Enter..
Code entry | System manager
,
0123456789
, as the case may be, and
Code
are on display.
6.
Enter the system manager code once more.
System manager | Please wait
, and, afterwards
INITIALISING | DELETING EEPROM
,
OK
,
EloStar Master
and
System Setup
are on display.
7.
Confirm with
Enter
.
Language | 1 Deutsch
is on display. By pressing
Enter
confirm the
language or with key
<
or
>
select another language.
8.
With key
<
or
>
select
English
, for example, and press
Enter
.
English | Saved
, as it may be, and
System setup | New system
are on display.
9.
With key
<
or
>
select
Terminal change
and press
Enter
.
System setup | No. locks: 1
is on display.
10. With key
<
or
>
select the number of locks in the system and press
Enter
.
Serial no. | Lock 1
,
Code entry
,
System manager
and
Code:
are
on display.
11. Enter the system manager code again.
Serial no. | Please wait
is on display.
