EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
98
7.15.6
Motor Service
Lock masters can examine the bolt movement by moving the bolt of the lock
step by step in both directions with menu
Motor service
.
Note
If
‘automatic closing with door switch’ is set via optional
PC software, the system will close the lock 1 minute after
the end of the motor steps described here.
Without automatic closing, the bolt stays in the position
reached via the last motor step.
1.
Unlock the system by opening lock 1 or by opening all locks.
See paragraph
‘System State’ on page 50.
2.
With key
>
select
Service
and press key
Enter
.
Service | Reset
is on display.
3.
With
>
select
Motor service
and press
Enter
again.
Service | Motor service
is on display.
4.
Confirm with
Enter
.
Code entry | Lock 01
is on display.
5.
With
>
select the lock, if necessary, and press
Enter
.
Code entry
,
Master
,
0123456789
, as the case may be, and
Code:
are on
display.
6.
Enter the master code.
Motor service | <-= open | close =->
is on display.
7.
With
>
select
open
or
close
.
Please wait
is on display. The bolt drives in / out by one motor step and stops.
Step OK
is on display.
8.
Repeat step 7, in both directions, as often as necessary.
You have successfully driven the bolt of the lock step by step.
