EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
67
7.12.7
Opening with Parallel Code
The first user opens lock 1, the second one opens lock 2 and a third one,
if required, opens lock 3. All users open according to their authorisation.
Settings
Option ‘Parallel code’ (systems with 2 / 3 locks only) is
activated in TwinComm. Boxes
PIN code
,
Release
,
Opening access
and / or
Card
of the user matrix
have been marked for you. The lock master has
registered your PIN-Code / card at the lock.
1.
Press key
Enter
and release it after a second.
The system checks its status. Date and time are on display.
2.
With menu key
<
or
>
select
Open
and confirm with key
Enter
.
Open
is on display. With more than one lock,
Lock: 1
is on display.
3.
If necessary, select the lock with menu key
<
or
>
and press
Enter
.
Code entry | Master
is on display.
4.
Present your user identification data.
Also see
‘User- / Personnel Numbers’ on page 51.
User no. | PIN code
is on display.
5.
With
Enter
select
PIN code
or with
<
or
>
and
Enter
Code card
and open
according to your user settings in the user matrix.
See the instructions ‘Open Lock …’ at the beginning of this chapter. Lock 1 opens.
Open | Lock open: 1
is on display.
6.
Another user carries out steps 1-5 at lock 2 and, if necessary, a third one does
the same at lock 3.
Open | Please wait
is on display. The lock bolt retracts.
Open | Lock open: No.
is on display.
You have successfully opened the lock.
