EloStar Master 3X0 / 4X0 / - smart
Assembly
Manual V.1.03H
44
5.6.8
Extending the tamper line of EloXT II
The blocking device EloXT II features a tamper loop in form of a cover
contact. You can add elements to that loop and attach a resistor for
monitoring. In idle state, the tamper loop is closed.
Fig. 32: Circuit tamper line of EloXT II
1.
Connect additional elements to the tamper loop via the designated screw
terminals on the circuit board assembly of EloXT II.
2.
If you want to attach resistance for monitoring, remove the jumper next to the
cover contact of TwinXT and attach the resistor instead of the jumper.
3.
Seal unit EloXT
II by adhering two seal labels “VdS” on top of the cover screws.
You have successfully extended the tamper loop.
