EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
53
7.9
User Authorisation
Before entering code, users enter their user
– or personnel number (“staffnb” on the
display of the operating unit).
The system administrator defines the authorisation of users via PC software by ticking /
marking boxes for persons at locks in a user matrix (PC software; descriptions of these
boxes see below). The authorisation within a lock system can be changed via optional
PC software.
In order to establish a certain order of authorisation in system EloStar, the system
administrator imports a configuration generated with PC software into system EloStar.
In order to grant a user the right to open a lock, the lock master (holder of the master
code of the lock) also has to register one or more of the following items for the user at
the lock:
•
PIN code / and
•
Code card or / and
•
RFID card
.
If box
Release
is not ticked / marked for a user in the user matrix, this user will not have
any rights and no function will be available for her or him.
Authorisation for opening locks via entering PIN code:
The system manager marks boxes
PIN code
,
Release
,
Open locks
for the user.
Authorisation for opening locks via code card:
The system manager ticks / marks all boxes listed above except box
PIN code
and
instead additionally box
Card
for the user.
Authorisation for opening locks via RFID:
The system manager ticks / marks the boxes
Card
,
Release
and
Open locks
.
Additionally, the value „RFID“ and the proper kind of RFID card has to be set for
parameter „Chip card“ on tab „Settings“ via software TwinComm / field “Type” of code
car
d has to be set to value “DESFire” vis QPadComm.
Personal PINs can be transmitted via RFID.
OTCs (1x codes / single-use codes) cannot be transmitted via RFID.
