EloStar Master 3X0 / 4X0 / - smart
Assembly
Manual V.1.03H
35
Fig. 23: Routing of cable outside the safe
1)
Operating unit
2)
Socket A for 4-pin plug of bus cable
3)
4-pin plug of bus cable
4)
Cable duct through side of safe
5)
Safe / Container for valuables
Fig. 24: Remove the menu keypad
4.
In order to access the pre-fabricated apertures behind the menu keypad,
slightly press with the thumb (A), push keypad to the right (B) and with the
finger nail (C) lever it and pull it off.
Caution
A wrong order of the steps of the assembly may cause damage
to the operating unit.
Do not take off protective foil on back of menu keypad. Take it off
after the installation
.
5.
Insert two screws into the proper apertures in the operating unit.
Caution
Applying too much power may lead to causing damage to the
operating unit.
Turn screws with a maximal torque of
1 Nm
.
6.
Fasten screws at the fastening points you have drilled.
You have successfully mounted the operating unit.
