EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
79
7.13.10
Configuration Import: Error Messages
During the import of a configuration, the error messages listed below may be on display
in the second display line. The display features two lines.
•
Modify invalid parameters via optional PC software and import the configuration
again.
Messages in the first line of the display:
Config. Error
an invalid value has been allotted to a parameter.
Lock system
configuration does not fit to the (hardware of) the system.
Messages in the second line of the display:
Alarm delay
!
The alarm delay triggered simultaneously with silent alarm has been set to last
longer than the permitted 0-99 minutes.
✓
Enter a value within the permitted range of values (PC software).
Block period
!
At leas
t one invalid date has been entered for ‘Blocked period’.
✓
Amend the data for timer program ‘Blocked period’.
CIT user
!
The user number of the first
‘CIT user’ is not within the permitted range of ’01-99’.
✓
Enter a value within the permitted range of values.
Close&Code
!
‘Manual closing with code query’ and ‘Automatic Closing with door switch’ /
‘Opening lock 1 -> 2’ are activated (on tabs ‘Settings / -1’).
✓
Tick off (AE: check off) one of the options.
Door open
!
The value for ‘Open door monitoring’ is not within the permitted range of ’00-99
minutes’.
✓
Enter a value within the permitted range of values.
Old code
!
The value for
‘Code validity’ is not within the permitted range of 0-99 months.
✓
Enter a value within the permitted range of values.
Open
!
The value for parameter
‘Opening lock 1 -> 2’ is not within the permitted range of
00-99 minutes.
✓
Enter a value within the permitted range of values.
Parallel code
!
‘Parallel code’ and ‘Dual code / 4-eyes (Opening)’ are marked.
✓
Unmark one of the options (
Tab ‘Settings’, TwinComm USB).
Part locked time
!
At least one invalid time specification has
been entered for ‘Part lock time’.
✓
Amend the data for timer program ‘Part lock time’.
