EloStar Master 3X0 / 4X0 / - smart
Assembly
Manual V.1.03H
32
Fig. 18: Cable routing with system EloStar
A)
Socket for connection of bus cable A
B)
Plug connection for earth cable
C)
Position for EMD screw opposite the lift-off contacts
(use left bore, borehole to the right not used)
8.
Attach the cover and fasten it with snap rivets.
Fig. 19: Cover, housing and snap rivets
Fig. 20: Example housing and caps
9.
If required, apply caps upon openings not used.
The centre bottom opening is for emergency power supply. At the right side of the
bottom, there is a micro USB socket that can be used for configuration.
You have successfully attached the operating unit QPad.
