EloStar Master 3X0 / 4X0 / - smart
Maintenance, Cleaning and Repair
Manual V.1.03H
100
8
Maintenance, Cleaning and Repair
In typical office environment, the system is maintenance-free. Ex works, it has passed a
performance test of 100.000 open - / close procedures.
Observe the bolt work maintenance interval recommended by the manufacturer of the
bolt work.
Repair tasks are to be performed solely by skilled electricians trained and authorised by
INSYS NICROELECTRONICS or partner companies.
Caution
Danger of short circuit of the electronic components.
Danger of damage to the system.
Note the instructions on how to clean the system.
Operating Unit
Clean the operating unit with a dry, soft, clean and lint-free cloth. Do not use other means
of cleaning equipment. For disinfection, only use disinfecting agents with a product
description that states that the agents are compatible with plastic polyethylene (PE), ABS
and PC-ABS (disinfection by wiping, afterwards wipe keypad surface with cloth
moistened with drinking water).
All Other Components
Clean all other components of your lock system only if necessary. Use nothing but a dry,
soft, clean and lint-free cloth. Wipe the surfaces exerting as little pressure as possible.
8.1
Changing the Battery of the QPad Battery Case
Only the variant with the sloping front comes with a battery case.
Take
a new 9 V block battery (no rechargeable battery, we recommend
lithium based batteries), access to operating unit required.
1.
Open the battery case at the bottom of the operating unit by pushing the tab of
the lid and pulling the lid downwards and backwards.
2.
Remove the used battery and replace it. Note the different size of the plug-in
connections of positive and negative pole.
Fig. 41: Battery case QPad
3.
Close the battery case in such a way that the tab of the lid snaps into place.
You have successfully changed the battery.