EloStar Master 3X0 / 4X0 / - smart
Assembly
Manual V.1.03H
36
5.3.2
Connecting Extensions to FlatControl
At the rear of operating unit FlatControl, there is the PCB of the operating
unit.
Fig. 32:
Fig. 33:
Fig. 25: Connections FlatControl
1)
Take off contacts
2)
Soldering point for extending the sabotage line
3)
JST sockets (not used)
4)
JST sockets for IO functions (for connecting other extension units)
5)
socket for bus cable A (socket B not used with EloStar Master systems)
•
If you want to connect IO functions of the operating unit, connect JST socket 4
of the PCB with an optional extension unit.
You have successfully connected extensions to the operating unit FlatControl.
