Platinum™ IP3
Installation and Operation Manual
Resource Module (PX-RES)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 49
* Only indicated on the Active PX-RES Module, not the redundant one.
Ensure working Ethernet connections to the redundant PX-RES module as this is not indicated via the
ENET LEDs for the redundant PX-RES module. If there is a problem with the physical ENET connection to
the redundant PX-RES module, it won't be able to take over as the active PX-RES module.
There are nine LEDs behind the Card-edge Ejector handle. All of these LEDs should be ON when the
POWER LED
is ON. If any one of them is OFF, it indicates a problem with a power circuit on the module.
Figure 16:
Power LEDs
