Platinum™ IP3
Installation and Operation Manual
PX-HSRMX-OBG Frame Sync and Mux Output Module
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 164
PX-HSRMX8O2D-OBG Optical Module with DensiShield
Figure 73:
PX-HSRMX8O2D-OBG Optical Module with DensiShield
PX-HSRMX-OBG Operation Modes
There are different operation modes available, depending on whether or not you have a Frame Sync
license.
MUX only mode (without Frame Sync license)
For proper audio muxing operation, each SDI channel destined for Audio MUX must be locked to the
Reference signal provided to the board. While SDI channels can be of different data rates (e.g. SD SDI,
HD, HD 3G), their field/frame-rates need to match those of the applied Reference.
In the Frame Sync / Mux Mode menu, the following modes of operation can be selected on a per SDI
channel basis:
MUX: Auto Detect
Note: MUX: Auto Detect is the recommended operation mode for boards without a frame sync license.
This mode auto checks if SDI channels are locked to the Reference signal provided to the board.
Locked SDI channels
All supported Audio muxing operations are applicable
Frame Sync / Mux Status menu reports locked channels as
Mux: Locked
CHANNEL STATUS LED associated with the SDI channel at the front card edge will be lit green
Unlocked SDI channel
s
No Audio muxing will be performed and the channel will bypass all processing stages on the board
Frame Sync / Mux Status menu reports unlocked channels as
Bypass
CHANNEL STATUS LED at the front card edge associated with the SDI channel will be off
