Platinum™ IP3
Installation and Operation Manual
Alarm Expansion Module (PX-ALARM)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 58
Figure 19:
PX-ALARM Module
You can expand audio across 2 frames by connecting densishield cables across PX-ALARM modules in
two frames. See Audio Expansion.
PX-ALARM Components
The PX-ALARM module consists of two cards assembled together as a single module (PX-ALARM), and
plugged into the rear of the Platinum IP3 frame.
PX-ALARM-ATDM
Audio TDM Expansion and Alarm Card
PX-ALARM-DATA
Data Expansion and Alarm Card
The Platinum IP3 frame has two rows of connectors for the PX-ALARM module. Each slot consists of one
60-pin and one 140-pin Samtec card-edge connector. The
PX-ALARM-DATA
card goes into one slot, and
the
PX-ALARM-ATDM
card goes into the other one. Both are assembled as a single module and inserted
into the frame.
The
PX-ALARM-ATDM
and
PX-ALARM-DATA
modules can be accessed via the Controller Web UI under
the
Control Cards
for a frame.
