Platinum™ IP3
Installation and Operation Manual
PX-FRONT-FAN and PX-REAR-FAN Modules
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 296
Fuses on Rear Fan Adapter Boards
Fuses are located under the base of the black shutter assembly found behind each rear fan.
To gain access to the rear fan fuses, carefully grasp the two tabs on the sides of the shutter assembly.
Then slide the shutter assembly towards you, tilting out the bottom, so that the assembly pivots around
the small studs at the top of the opening. When replacing the shutter assembly, ensure the top of the
assembly is inserted
behind
these studs.
CAUTION
: Ensure you disconnect the two power cables when replacing rear fan fuses in a live (powered)
IP3 frame.
Figure 143:
Rear Shutter Assembly
