Platinum™ IP3
Installation and Operation Manual
AES Balanced/Coaxial Modules with TDM Capability
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 239
Back Panel I/O Module for PT-AEBT-OB/PT-AECT-OB
The
PT-AEB-OBP
back panel I/O module corresponds to the
PT-AEBT-OB
output module. The
PT-AEC-
OBP
back panel I/O module corresponds to the
PT-AECT-OB
output module. DB-25 connectors are used
on the
PT-AEB-OBP
and
PT-AEC-OBP
back panel I/O modules. To provide the required BNC interface,
the
PT-AEC-BOC
must be used in conjunction with the
PT-AEC-OBP
for connection to coaxial cables.
Figure 106:
PT-AEC-BOC Cables
Installation
Output Module Installation
All output modules are installed at our manufacturing facility. If you need to purchase additional
components, please contact your dealer or our Sales Department.
Back Panel I/O Module Installation
All back panel modules are installed at our manufacturing facility. If you need to purchase additional
components, please contact your dealer or our Sales Department.
Control
This Module’s parameters can be enabled and/or changed via CCS Navigator or the IP3 Controller.
