Platinum™ IP3
Installation and Operation Manual
Platinum SX Hybrid Multiviewer Modules
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 260
The Multiviewer’s back module provides two DVI and four HD/SD-SDI output connections. You must
configure the multiviewer to display either two DVI or four SDI outputs. You cannot send layouts to the
DVI and SDI outputs simultaneously.
Inserting Platinum SX Hybrid Modules into a
Frame
CAUTION
Before you install the output module, ensure you properly align the module with the appropriate
guide notches in the router frame. Failure to do so may damage the pin connections between the
back and output modules.
Output modules can be installed without powering down your Platinum IP3 router frame. Output
modules are hot-swappable, and they do not need to be installed next to each other. However, keep in
mind that the slots you select to install the multiviewer may affect how efficiently you can populate
other output slots in the router.
1.
If you have not done so already, remove any currently installed output modules from the
appropriate four slots (per output module) where you want to install the output module.
2.
Open the I/O Guide door.
