Platinum™ IP3
Installation and Operation Manual
Video Crosspoint Module (PX-576x1024-3G/PX-288x512-3G)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 75
removed or halted due to error. The shadow module’s outputs are disabled until it becomes active, but
otherwise performs all operations in parallel with the primary crosspoint module.
After the initial setup as Primary and Secondary, it's important to think of the Crosspoint modules using
the
Active
and
Standby
notion, because those states define the Module that is currently functioning and
the one backing it up. The Active Module is not necessarily the Primary one; rather, it is the one (could
be Primary or Secondary) that took over in the last failover situation (and there may be several such
failover situations over a period of time).
Extracting the Video Crosspoint from the 28 RU Frame
1.
On the
lower
extractor, press the
back side of the locking pin while
pushing the extractor in.
2.
After the extractor releases, pull it
down.
