Platinum™ IP3
Installation and Operation Manual
Resource Module (PX-RES)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 51
DIP Switches
The RESET push button is a system reset.
On SW4, pins 1 and 2 are used to force the module to failsafe boot.
XY Ports
Note:
The two XY ports on the rear of the Platinum IP3 frame are not used or supported in the initial
release of Platinum IP3. If coaxial XY protocol is required in a system, the Imagine Communications EDGE
Router Protocol Translator can be used to interface coaxial XY networks with the Platinum IP3 Control
System.
Serial Ports
Note:
The rear of the Platinum IP3 frame has 2 RS232 / RS422 Ports that do not support the XY protocol
in the Platinum IP3 System Release 1.0. If Serial XY protocol is required in a system, the EDGE Router
Protocol Translator can be used to interface serial XY with the Platinum IP3Control System.
