Imagine Platinum IP3, Installation And Operation Manual

Page: 118 / 315

Platinum™ IP3
Installation and Operation Manual
Input Modules (PX-IB)
© 2016 Imagine Communications Corp. Proprietary and Confidential. September 2016 | Page 118
Name Description Type Options
Rate Detect Detects data rate RO

Unknown

SD

HD

3G
Mute Mutes the output of the board RW

Output Enabled

Output Muted
Input Optical Power
(Modules with SFPs only)
Reports input optical signal power level RO

Too Low

-32 - 1 dBm

Too High
Table 49: CRC&EDH Parameters
Name Description Type Options
EDH Presence EDH package present in input SD signal RO

Yes

No

N/A
Input EDH Error EDH error present in input SD signal RO

Yes

No

N/A
CRC/EDH Counter Control Enables or disables the CRC/EDH Error
Fields counter and the Video Error detector
RW

Enable (Default)

Disable
CRC/EDH Error Fields Shows CRC/EDH errors RO 0 ~ 65535
CRC/EDH Error Clear Clear CRC/EDH error counter RW

Yes

No (Default)
Table 50: Advanced Parameters
Name Description Type Options
Signal Input Range In normal operation, input EQ is set to
compensate cable loss where at the other
end of the cable, the driver outputs
800mVpp.
If a passive splitter is present on the input
side of the module, set this to
Small
(400mVpp) .

Normal (800mVpp)

Small (400mVpp)
EQ Power Save Mode Puts equalizer into power save mode RW

EQ Always On

Auto

EQ Always Off