Platinum™ IP3
Installation and Operation Manual
Frame Synchronizer and Demultiplexing Input Modules (PT-FSDMX-IBG/PT-FSDMXO-IBG, PT-FSDX8C1D-IBG, PT-FSDMX8O1D-IBG)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 145
PT-FSDMX-IBG
PT-FSDMXO-IBG
PT-FSDX8C1D-IBG
PT-FSDX8COD-IBG
Number of Outputs
N/A
1 DensiShield
Connector
1 DensiShield
Connector
Power Consumption
Up to 50 watts (max
consumption,
depending on
operating conditions)
Up to 50 watts (max
consumption,
depending on operating
conditions)
Up to 52 watts (max
consumption,
depending on
operating conditions)
Up to 52 watts (max
consumption,
depending on
operating conditions)
SD SDI / ASI
(270Mb/s)
SMPTE 259M, ASI
Format
525i59.94, 625i50, ASI
Return Loss
> 18 dB from 5 MHz to 270 MHz
Equalization
Adaptive cable equalization for up to 984 ft (300m), typical, of Belden 8281 coaxial cable
See Equalization Information for PT-FSDX8C1D-IBG (on page 145)
HD-SDI (1.5Gb/s)
SMPTE 292M
Format and image
sample structure
SMPTE274M (1080i, 1080sF, 1080p)
SMPTE296M (720p)
Return loss
> 18 dB (typical) from 5 MHz to 1485 MHz
Equalization
Adaptive cable equalization for up to 590 ft (180 m), typical, of Belden 1694A co-axial
cable
HD-SDI (3Gb/s)
SMPTE 424M
Format and image
sample structure
SMPTE 425M Level A
SMPTE 372M
Return loss
> 15 dB (typical) from 5 MHz to 1485 MHz
> 10 dB (typical) from 1485 MHz to 2970 MHz
Equalization
Adaptive cable equalization, up to 328 ft (100 m), typical, of Belden 1694A co-axial cable
Equalization Information for PT-FSDX8C1D-IBG
The cable length is 300 meters, Belden 8281, but the following applies in addition:
Note: The PT-FSDX8C1D-IBG uses an extended 3G-reach equalization. When combined with Belden 8281
coaxial cable, a pathological pattern, and a non-SPMTE424 (6.1.7)-compliant signal with excessive
output amplitude excursions, the source equalization may be reduced to between 200 and 300 m for
SD-SDI signal.
This condition typically only occurs with older SD-SDI equipment having a 1uF capacitor on the output.
All recent and multi-rate SD/HD/3G equipment is compliant with the standard (has at least a 4.7uF
capacitor on the output), and can achieve 300 m with 8281 cable and pathological pattern.
