Platinum™ IP3
Installation and Operation Manual
Platinum SX Hybrid Multiviewer Modules
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 259
This table provides information about the number of embedded, discrete analog, and discrete AES audio
inputs that are supported when the multiviewer is installed in15RU and 28RU Platinum IP3 frames.
Table 118:
Audio Configurations
Audio Input Type
15RU (32 Slots)
28RU (64 Slots)
Embedded Channels
128 per module
128 per module
4096 per frame
8192 per frame
Discrete Analog
(stereo/mono)
16/32 per module
16/32 per module
512/1024 per frame
1024/2048 per frame
Discrete AES
(balanced/unbalanced)
16 per module
16 per module
512 per frame
1024 per frame
Platinum SX Hybrid Back Module
The multiviewer’s back module is connected to the rear of the router frame and provides connectors for
output video signals, communication devices, and external devices. To install the back module:
1.
Remove any currently installed output back modules from the appropriate four slots (per output
module) where you want to install the back module.
2.
Remove the blank covers or output module back connector of the appropriate four slots (per output
module) on the rear of the frame (a #1 Phillips-head screwdriver is required).
3.
Carefully align and then attach the back module over the empty slots using the captive screws.
Do not discard the screws, as you will need them again. Do not tighten down the screws completely
when installing the back module. First, install the output module, and then tighten the back module
screws.
