Platinum™ IP3
Installation and Operation Manual
Modules
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 40
Rear Connectors
Output Rear Connectors
Table 6:
Output Rear Connectors
Module
Description
PX-HSR16C-OBP
16 HDBNC SD/HD/3G output back panel
PX-HSR8C2DS-OBP
8 HDBNC + 2 DensiShield SD/HD/3G output back panel
Input Rear Connectors
Table 7:
Input Rear Connectors
Module
Description
PX-HSR9C-IBP
9 HDBNC SD/HD/3G input back panel
PX-HSR9C1D-IBP
9 HDBNC/1 HDBNC output SD/HD/3G Matrix Expansion back panel
Expansion Modules
The Platinum IP3 frame supports expansion modules to provide TDM and Data Fabric interconnect with
a second frame when operating in expansion mode. Expansion is achieved using output modules. There
must be corresponding output cards in the primary and expansion frames for inputs to be accessible.
For cost effective input expansion, expansion-only output back modules are available.
The Expansion module serves as the physical interface to the DensiShield cable for TDM expansion. It
also provides RJ-45 Jacks for GigE interfacing. The Expansion Module plugs into the bottom two slots.
Crosspoint Modules
The Platinum IP3 provides redundant crosspoint paths. By using redundant crosspoint modules, a fully
redundant path through the system is available. See Crosspoint Modules (on page 40).
The Platinum IP3 uses unique Video and Audio Crosspoint modules which are not compatible with
Platinum frames.
Table 8:
Crosspoint Modules
Module
Description
PX-576X1024- 3G
Video Crosspoint Module
See
Video Crosspoint Module (PX-576x1024-3G) (see "Video Crosspoint Module (PX-576x1024-
3G/PX-288x512-3G)" on page 72)
PX-ATDM64- X28
Audio TDM Crosspoint Module
See Audio TDM Crosspoint Module (PX-ATDM64-X28) (on page 84)
