Platinum™ IP3
Installation and Operation Manual
Introduction
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 36
Once created, connections will be displayed in the
Defined Expansion Connections
section.
Audio Expansion
Audio Expansion functions like System Expansion, but at the Audio level, allowing for Audio to be
available to other frames.
To set up audio expansion:
1.
Click the
Expansion Setup
button in the Hardware Foundry.
2.
Select
Audio Expansion
from the Type drop-down
3.
Select the first frame from the
Frame
drop-down list
4.
Select the frame to connect it to from the second
Frame
drop-down list
5.
Click the
Add Connection
button
Figure 12:
System Configuration - Audio Expansion
Once created, audio expansion connections will be displayed in the
Defined Expansion Connections
section.
Note: A single frame can be used in a maximum of one audio expansion and one system expansion
connection.
In addition to the Audio expansion definition in the UI, ensure you make the required physical
connections - see Hardware Connections for Audio Expansion (on page 95).
