Platinum™ IP3
Installation and Operation Manual
Frame Parameters
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 107
Figure 40:
Sync Parameters
Sync Notes
The
Sync Mode
parameter (set to
Auto
by default) allows for configuration of switching point
settings. In
Auto
mode, the output switches relative to the detected sync reference assigned to the
module.
If
Sync Mode
is set to
Standard
, the
Output Standard
parameter can be used to specify the video
standard to use as the switching point timing reference relative to the sync reference signal
detected on the selected Sync input (Sync 1 - 4)
If
Sync Mode
is set to
Advanced
, the
Sync Pulse Delay
parameter can be used to specify where the
output switching point is relative to the reference signal. The delay is in units of microseconds.
Power Supplies
The
Power Supplies
section provides the following parameters:
Table 42:
Power Supplies parameters
Parameter
Type
Description/Options
Top Shelf 5V Power
(28 RU only)
RO
Present
Failed
5V Power
(15 RU only)
RO
Present
Failed
Bottom Shelf 5V Power
(28 RU only)
RO
Present
Failed
Zone 1 24V Power
RO
Present
Failed
