Platinum™ IP3
Installation and Operation Manual
Analog/Digital Audio Converter Modules with TDM
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 223
Back Panel I/O Module for PT-DACT-OB
The
PT-A2-BP
back panel I/O module corresponds to the
PT-DACT-OB
module. DB-44 connectors are
used on the
PT-A2-BP
. The optional
PT-A2-DTB
terminal block adapter is available to accommodate
wiring of individual signals to the frame.
Figure 98:
PT-A2-DTB Terminal Block Adapter
Installation
All output modules and back panel modules are installed at our manufacturing facility. See Installing
Input and Output Modules on page 363 for the procedure for field expansion or replacement of output
modules. If you need to purchase additional components, please contact your dealer or our Sales
Department.
Control
This Module’s parameters can be enabled and/or changed via CCS Navigator or the Platinum IP3
Controller.
