IBM IntelliStation M Pro 6218, Problem Determination And Service Manual

Page: 58 / 168

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing,” on page 65 to determine which components are customer replaceable units
(CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
035-253-s99 RAID adapter initialization failure.
1. Make sure that the ServeRAID adapter is
configured correctly. See the ServeRAID
documentation for more information.
2. Reseat the following components:
a. ServeRAID adapter
b. Adapter cable
3. Replace the following components one at a
time, in the order shown, restarting the
computer each time:
a. ServeRAID adapter
b. Adapter cable
c. (Trained service technician only) System
board
035-254-0nn Setup error; unable to allocate memory
to run test.
Check the system resources and make more
memory available (see “Starting the
Configuration/Setup Utility program” on page 126);
then, run the test again.
035-255-0nn Internal error.
1. Reseat the following components:
a. SAS hard disk drive cable
b. SAS mini-PCI adapter
2. Replace the following components one at a
time, in the order shown, restarting the server
each time:
a. SAS hard disk drive cable
b. SAS mini-PCI adapter
035-260-0nn System to controller interface failure.
1. Reseat the ServeRAID adapter.
2. Replace the following components one at a
time, in the order shown, restarting the
computer each time:
a. ServeRAID adapter
b. (Trained service technician only) System
board
035-265-0nn Adapter Communication error.
1. Update the ServeRAID adapter firmware (see
“Updating the firmware” on page 125).
2. Reseat the ServeRAID adapter.
3. Replace the ServeRAID adapter.
035-266-0nn Adapter CPU test error.
1. Update the ServeRAID adapter firmware (see
“Updating the firmware” on page 125).
2. Reseat the ServeRAID adapter.
3. Replace the ServeRAID adapter.
42
IBM IntelliStation M Pro Type 6218 and 9236: Problem Determination and Service Guide