IBM FlashSystem 900, Service Manual

Page: 397 / 546

3746-900 MAPs
MAP 5550: 3746-900 Activate/Deactivate Line Problems or Line Errors
on CLP
001
¹
You should be logged ON on the service processor console. If not go to “Console Use for
maintenance” on page 1-1 for logging ON and return here.
¹
On the "MOSS-E View" window, double click on the 3746-900 icon.
¹
On the "3746-9x0 menu", click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the active CDF-E" and
click on "OK".
¹
Go to Step 002.
002
Is the problem reported on LIC11 line?
Yes No
003
Is the problem reported on LIC12 line?
Yes No
004
Go to Step 022 on page 2-142.
005
Go to Step 013 on page 2-140.
006
¹
On the "Resource Selector" window, select the LIC11 (address range) associated with the ARC that
you want to test and click on "OK".
¹
On the following "Resource Selector" window, select the "ARCs" corresponding to the adress range.
¹
On the two next windows, select the suspected ARC and click on "OK".
¹
Once the resource is set to concurrent mode a "Maintenance Options" window is displayed.
Is the "Maintenance Options" window displayed?
Yes No
007
¹
Check that the customer stopped traffic on the suspected ARC.
¹
If APPN/IP is installed, deactivate the ports concerned (refer to “Activate/Deactivate a Resource
Via CCM” on page 1-150), then continue the procedure from here.
¹
Return to the "3746-9x0 Menu".
¹
Select the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the active CDF-E"
option and click on "OK".
¹
Go to Step 006
008
¹
On this window, select the "Perform Diagnostics on the resource" option and click on "OK".
¹
The "Test and Running Option Selection" window is displayed.
(Step 008 continues)
Chapter 2. MAPs for FRU Isolation
2-139