IBM FlashSystem 900, Service Manual

Page: 122 / 546

3746-900/Service Processor Maintenance
3746-900 Maintenance Using an SRC Sequence Number
You should be logged ON on the service processor console. If not go to “Console Use for maintenance”
on page 1-1 for logging ON and return here.
1. On the "MOSS-E VIEW" window, double click on the 3746-900 on which you want to work.
2. The "3746-9x0 Menu" window is displayed.
3. Click on the "Problem management" option. *
4. The "Problem management functions" window is displayed.
5. Double click on the "Perform Maintenance" option.
6. The "Resource Selection Options for Maintenance" window is displayed.
On this window, select:
¹
"By the sequence number of a system reference code".
7. Click on "OK". The "System Reference Code Sequence Number" window is displayed.
8. Enter the SRC sequence number and click on "OK".
9. The "Resource Selector" window is displayed with the FRU suspected and their fault probability.
10. Record this FRU list with their fault probability. Then go to “3746-900 FRU List” on page 1-29 to
identify each FRU.
3746-900 Maintenance Using a FRU list
You should be logged ON on the service processor console. If not go to “Console Use for maintenance”
on page 1-1 for logging ON and return here.
1. On the "MOSS-E VIEW" window, double click on the 3746-900 on which you want to work.
2. The "3746-9x0 Menu" window is displayed.
3. Click on the "Problem management" option.
4. Double click on the "Perform Maintenance" option.
5. The "Resource Selection Options for Maintenance" window is displayed.
On this window, select:
¹
"Via the active CDF-E".
6. Click on "OK". The "Resource selector" window is displayed. Go to “3746-900 FRU List” on
page 1-29 to identify each FRU.
Service Processor Maintenance Using an SRC Sequence Number
You should be logged ON on the service processor console. If not go to “Console Use for maintenance”
on page 1-1 for logging ON and return here.
1. On the "MOSS-E VIEW" window, double click on the service processor icon.
2. The "Service Processor Menu" window is displayed.
3. Click on the "Problem management" option.
4. Double click on the "Manage Alarms/Errors/Events (SRCs)" option.
5. Select the "Alarm" option then click on "OK".
6. On the next window double click on the alarm which has the SRC number that you want.
7. A FRU or a list of FRUs with the FRU location is displayed.
8. Record this FRU list with their fault probability. Then go to "Service Processor Problem Determi-
nation" in the corresponding Service Processor Installation and Maintenance manual.
1-28
3746-900: Service Guide