IBM FlashSystem 900, Service Manual

Page: 379 / 546

3746-900 MAPs
044 (continued)
¹
Using the "Cancel" key return to the "Diagnostics" window.
¹
The "Diagnostics" window is displayed, select the "specific Adapter" and the "No" wrap
options. Then click on "OK".
¹
On the next window select the processor which has the suspected LIC11, then click on
"OK".
¹
The "Diagnostics" window is displayed again and the "Elapsed time" is incremented during
test duration.
¹
At the end of the test the number of errors is indicated by an arrow.
Is the diagnostic error-free?
Yes No
045
Go to Step 049.
046
Problem solved. Go to “MAP: 3746-900 Ending Procedure In Offline Mode” on page 1-137.
047
Go to Step 054
048
All diagnostics are error free. The problem can be intermittent. Call your support for assistance.
049
Is there another FRU in your FRU list?
Yes No
050
Call your support for assistance.
051
Is this FRU the CABM?
Yes No
052
Go to Step 044 on page 2-120.
053
Go to Step 054
054
¹
Return to the "Problem management" window.
¹
Double click on the "Perform Specific Diagnostics" option.
¹
On the "Diagnostic Control Monitor" window, select the option:
– "Run diagnostics for a specific hardware resource"
¹
Then click on "OK".
¹
On the "Resource Selector" window, select the LIC11 that you want to test, then click on "OK".
¹
On the next "Resource Selector" window, select again the LIC.
¹
On the "Test and Running Option Selection" the resource desired is displayed with "LIC11 MAT"
(Manual Assurance Test) option preselected, click on "OK".
¹
An "Information Required" window is displayed prompting you to install a wrap plug.
¹
Locate the LIC11.
(Step 054 continues)
Chapter 2. MAPs for FRU Isolation
2-121