IBM FlashSystem 900, Service Manual

Page: 151 / 546

3746-900 FRU Exchange
MAP: ARC
001
Is the "Resource Selector" window displayed?
Yes No
002
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Options Selection for Maintenance" window, select the "Via the Active
CDF-E" option, click on "OK".
¹
Go to Step 004.
003
Are you on the "Resource selector" window with the suspected FRU list displayed, obtained via
the CPN number?
Yes No
004
¹
On the "Resource Selector" window, select the LIC11 (address range) associated with the ARC
that you want to test, then click on "OK".
¹
On the following "Resource Selector" window, select the "ARCs" corresponding to the address
range, then click on "OK".
Is the ARC that you want to test is alone in its ARC group?
Yes No
005
Continue with Step 007.
006
Go to Step 010 on page 1-58.
007
¹
Check with your customer all the lines speed connected to the ARCs which belong to the same ARC
group of the ARC that you want to test.
(Step 007 continues)
Chapter 1. START
1-57