IBM FlashSystem 900, Service Manual

Page: 431 / 546

Service Processor MAPs
MAP 6000: How to run 3746-900 Diagnostic in Concurrent Mode
Only diagnostic on processor, coupler, LICxx, LCPx, LCEx, or ARCxx can be run in concurrent mode.
Note
When an multiaccess enclosure (MAE) is connected to the 3746-900 via an SIE/SAC cable an MAE
selective IML can be performed in concurrent mode using the procedure described in “MAP 6030:
How to Run the Selective IML on the Multiaccess Enclosure” on page 3-51.
Important
There is no diagnostic for the TIC3 of the CBSP, and for the SIE.
001
¹
You should be logged ON on the service processor console. If not, go to “Console Use for
maintenance” on page 1-1 for logging ON and return here.
¹
On the "MOSS-E View" window, double click on the 3746-900 icon.
¹
On the "3746-900 menu", click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window select the "Via the active CDF-E" and
click on "OK".
¹
Go to Step 002.
002
In the following table, find the FRU you want to test and go to the step indicated.
003
¹
Using the location of the suspected CBC identify the 3745 CCU on which it is connected.
CBC Location 3745 CCU
07N-A1-E CCU A
07N-A1-G CCU B
(Step 003 continues)
Select FRU Go to
ARC Step 059 on page 3-26
CBC Step 003
CBSP/CBSP2/CBSP3 Step 006 on page 3-18
CLP/CLP3 Step 081 on page 3-30
ESCC/ESCC2 Step 010 on page 3-19
ESCP/ESCP2/ESCP3 Step 024 on page 3-21
LCEB Step 131 on page 3-40
LCEE Step 131 on page 3-40
LCPB Step 131 on page 3-40
LCPE Step 131 on page 3-40
LIC11 Step 099 on page 3-35
LIC12 Step 115 on page 3-38
LIC16 Step 124 on page 3-39
TIC3 Step 037 on page 3-23
TRP/TRP2/TRP3 Step 045 on page 3-24
Chapter 3. How to Run Diagnostics
3-17