IBM FlashSystem 900, Service Manual

Page: 219 / 546

3746-900 FRU Exchange
010 (continued)
– On the "Perform general IML" window, click on "YES" to continue.
– On the next "Perform general IML" window, click on "NO" to start an IML without diagnostic.
– Return to the "MOSS-E View" window.
– Click on the "Program" title bar.
– Click on "Status" option and wait for the IML to end with 00000000 displayed and the ready LED
ON. Then click on "OK". In case of a problem during IML, a code is displayed on the control
panel. This code can be flashing or steady (more than 60 seconds) while the ready LED is
blinking.
Does the ready LED come ON?
Yes No
011
¹
Go to Chapter 4, “3746-900 FRU Exchange” on page 4-1 for the FRU replacement, then return
here.
Did you change the TIC3 of the CBSP?
Yes No
012
Go to Step 027 on page 1-126
013
Is there a character displayed in the "Console not accessible" window on the 3746-900
control panel?
Yes No
014
Go to Step 048 on page 1-128
015
Go to Step 028 on page 1-126
016
Are you here for a DCDC problem on CLP?
Yes No
017
Go to Step 019.
018
¹
First check the state of CP3, CP4, CP5, CP6, or CP7.
¹
If one or several CP(s) are OFF go to “MAP 2605: 3746-900 Either CP3, CP4, CP5, CP6, or CP7 is
Tripped” on page 2-33
¹
Otherwise go to Step 019.
019
Are you here for a CLP problem?
Yes No
020
Go to Step 024 on page 1-126.
021
(Step 021 continues)
Chapter 1. START
1-125