IBM FlashSystem 900, Service Manual

Page: 85 / 546

Safety
3745 Models 21A to 61A Safety Label Identifications
The safety labels shown in Figure 0-30 are in English. They are also available in other languages. See
“3745 Models 21A to 61A Safety Label Part Numbers by Country” on page lxxxviii for ordering.
LABEL A LABEL G
LABEL B
LABEL H
LABEL C
LABEL X LABEL D
LABEL E
LABEL R UK WRANING
TILT LABEL
HAZARDOUS AREA
TRAINED SERVICE
PERSONNEL ONLY This aquipment has been tested with a class a
computing device and has been found to comply
with part 15 FFC rules. See instruction manual.
Operation in a residential area may cause
unacceptable interference to radio and tv
reception requiring the operator to take whatever
steps are necessary to correct the interference
LINE VOLTAGE
PRESENT WITH
MACHINE POWER
OFF
WARNING
High grounding conductor current. Grounding
circuit continuity is vital for safe operation
of machine. Never operate machine with grounding
conductor disconnected
TURN MAIN
LINE SWITCH
"OFF" BEFORE
REMOVING
TO DISCONNECT THIS
UNIT COMPLETELY,
CB1 ON MAINFRAME
MUST BE IN
THE "OFF" POSITION
THIS MACHINE IS
WIRED FOR
V
See logic drawings for
alternate voltage insn
CAUTION
REMOVE PRIMARY POWER
BEFORE REMOVING COVER
CAUTION
DUE TO CONNECTED EQUIPMENT
HAZARDOUS VOLTAGES
MAY BE PRESENT AT ANY TIME
WARNING
CONNECT ONLY APPARATUS COMPLYING
WITH BS 6301 TO THESE PORTS
USE CARE WHEN MOVING
ON ROUGH SURFACES.
DO NOT TIP MORE THAN
10 DEGREES.
DO NOT REMOVE THIS LABEL
CAUTION
Figure 0-30. 3745 Models 21A to 61A Safety Labels
SAFETY
lxxxiii