IBM FlashSystem 900, Service Manual

Page: 109 / 546

3746-900 Panel Codes
3746-900 Control Panel Codes
Note
When the microcode is a possible cause of the error, it is recommended that you check if you have the
highest level of microcode for your machine and that any applicable MCFs are installed. Your support
structure will have this information.
Important
The panel codes indicate an error when they are flashing or if they stay ON more than 60 seconds.
If a flashing panel code is not described below, a hardware problem is suspected, call your support for
assistance.
Table 1-3 (Page 1 of 9). 3746 Model 900 Control Panel Code
Panel Code Action to be Taken
00000000 IML complete, box available.
00101001 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24. If the error is not corrected a microcode problem is suspected. Contact
your support structure.
00101003 Error detected with BATS. Exchange the FRU Group 2502 on page 1-25, go to
page 1-24.
00101004 to 00101006 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00101007 Error detected with BATS. Exchange the FRU Group 2503 on page 1-25, go to
page 1-24.
00101008 to 0010100F Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00101010 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00101013 Error detected with BATS. Exchange the FRU Group 2520 on page 1-25, go to
page 1-24.
00101020to 00101021 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00101022 Error detected with BATS. Exchange the FRU Group 2503 on page 1-25, go to
page 1-24.
00101030 BATS Start memory test
00101031 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00101033 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00101036 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00101038 Error detected with BATS. Exchange the FRU Group 2504 on page 1-25, go to
page 1-24.
0010103F BATS ended without error
00101041 BATS Responder phase started
00101050 to 00101052 Error detected with BATS. Exchange the FRU Group 2501 on page 1-25, go to
page 1-24.
00323270 Error detected at IML. TIC3 of CBSP not present. If TIC3 is present exchange the
FRU Group 2518 on page 1-25, go to page 1-24.
00323272 Coupler 1 (normally TIC3) of CBSP unplugged in concurrent mode.
00323273 Error detected at IML. Coupler 1 of the CBSP has an unknown type. Exchange the
FRU Group 2506 on page 1-25, go to page 1-24.
00323274 or 00323275 Error detected at IML. Coupler 1 of the CBSP is not a TIC3. Install a TIC3 coupler
in position 07N-A1-F1.
00323277 TIC3 of CBSP unplugged before being set to concurrent mode. If the TIC3 is cor-
rectly plugged exchange the FRU Group 2521 on page 1-25, go to page 1-24.
00323279 Error detected on hot plugging. Coupler 1 of the CBSP has an unknown type.
Exchange the FRU Group 2506 on page 1-25, go to page 1-24.
Chapter 1. START
1-15