IBM FlashSystem 900, Service Manual

Page: 323 / 546

3746-900 MAPs
007
Call your support for assistance.
008
Go to Step 009.
009
You are here with a processor installed, error free and without any coupler.
¹
Plug the first coupler associated with the processor.
¹
Continue with Step 010.
010
¹
Plug the coupler associated with the processor.
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Configuration Management" option.
¹
Double click on the "Display/Update Active Configuration (CDF-E)" option.
¹
On the "Active CDF-E Display - Resource Selector" window check the presence of the plugged
coupler. The coupler must be identified by both its name and line address.
Is the coupler identified by its name and its line address in the CDF-E?
Yes No
011
Is the associated processor still identified in the current CDF-E?
Yes No
012
Go to Step 026 on page 2-66
013
Go to Step 014
014
Here we test the processor and its attached coupler
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the Active CDF-E"
option and click on "OK".
¹
On the "Resource Selector" window, select the processor and click on "OK".
¹
On the next "Resource Selector" windows, select the processor and click on "OK".
Is the "Maintenance Options" window displayed?
Yes No
015
Call your support for assistance.
016
¹
On the "Maintenance Options" window, select the "Perform Diagnostic on the Resource" option and
click on "OK".
(Step 016 continues)
Chapter 2. MAPs for FRU Isolation
2-65