IBM FlashSystem 900, Service Manual

Page: 284 / 546

3746-900/Service Processor/Network Node Processor MAPs
002
The service processor icon is white.
¹
Check if the yellow LED of the service processor indicating disk access is active.
¹
If the yellow LED is sometimes ON and sometimes OFF wait a few more minutes. If the symptom
persists, call your support for assistance.
¹
If the yellow LED is always OFF, call your support for assistance.
003
The 3746-900 icon yellow is a normal state. Its duration depends on the 3746-900 configuration.
(Step 003 continues)
Table 2-1. Icons Color Selection Table
Machine/Icon Icon Color Go to
Service
Processor White Step 002 on page 2-26.
3745 Any Color The appropriate MIP:
¹
IBM 3745 Communication Controller Models 130 to 17A,
Maintenance Information Procedures, SY33-2070 for
3745 Model 17A.
¹
IBM 3745 Communication Controller Models 210 to 61A,
Maintenance Information Procedures, SY33-2054 for
3745 Models 21A to 61A.
3746 Yellow Step 003 on page 2-26.
White Step 004 on page 2-27.
Grey Step 005 on page 2-27.
Pink Step 006 on page 2-27.
Red Step 030 on page 2-30.
NNP-X White The control point is being started and the configuration is
being activated. This is a normal state, however if this state
stay a too long time suspect a problem. Check if you have
alarms at the service processor
Grey There is:
¹
No connection betweeen the service processor and the
network node processor.
¹
Or link not ready between the 3746-9xx and the control
point of the network node processor.
Go to Step 031 on page 2-30.
Pink The control point is waiting for operator start, or no NDF
(Node Definition File). Go to Step 044 on page 2-31.
Blue The connection between the service processor and the
network node processor is OK. The network node
processor is in standby mode state. The control point must
be started. Go to Step 047 on page 2-32.
MAE-Link White A selective IML is being started on the multiaccess enclo-
sure. This is a normal state, however if this state stay a too
long time suspect a problem. Check if you have alarms at
the service processor
Grey There is no connection betweeen the service processor and
the multiaccess enclosure.
Go to Step 022 on page 2-29.
Red The multiaccess enclosure is in concurrent maintenance. To
put back the multiaccess enclosure in normal mode start a
"Selective IML on MAE". Refer to “3745/3746-900/Service
Processor Windows Overview” on page 1-7.
2-26
3746-900: Service Guide