IBM FlashSystem 900, Service Manual

Page: 327 / 546

3746-900 MAPs
013
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Configuration Management" option.
¹
Double click on the "Display/Update Active Configuration (CDF-E)" option.
¹
On the "Active CDF-E Display - Resource Selector" window check the presence of the plugged
coupler. The coupler must be identified by both its name and line address.
Is the coupler now present in CDF-E and identified by its name and its line address?
Yes No
014
Go to Step 016.
015
Go to Step 025 on page 2-70.
016
¹
Exchange the suspected coupler. Go to Chapter 4, “3746-900 FRU Exchange” on page 4-1.
¹
Wait until the "alarm xxxx FRU unplugged' and 'alarm xxxx FRU plugged' are displayed then continue.
017
¹
On the "Active CDF-E Display" - Resource Selector" check the presence of the plugged coupler. The
coupler must be identified by both its name and line address.
Is the coupler now present in CDF-E and identified by its name and its line address?
Yes No
018
Did you change the processor?
Yes No
019
Go to Step 024 on page 2-70.
020
Call your support for assistance.
021
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the Active CDF-E"
option and click on "OK".
¹
On the "Resource Selector" window, select the LIC11 and click on "OK".
¹
On the next "Resource Selector" windows, select the LIC11 and click on "OK".
Is the "Maintenance Options" window displayed?
Yes No
022
Call your support for assistance.
023
(Step 023 continues)
Chapter 2. MAPs for FRU Isolation
2-69