IBM FlashSystem 900, Service Manual

Page: 171 / 546

3746-900 FRU Exchange
005 (continued)
Is the "Maintenance Options" window displayed?
Yes No
006
Call your support for assistance.
007
Go to Step 030 on page 1-79
008
In this Step we will try to set the ESCP in permanent reset. If the operation is not successfull nertheless
continue with Step 009.
¹
Press the Ctrl/Esc keys at the same time.
¹
On the "Window List" Window, double click on the "3746-9x0 Menu".
¹
Click on "Problem Mangement" option.
¹
Double click on "Change Resource Status".
¹
Click on the ESCP that you want to remove the ESCC, then click on "OK".
¹
On "Resource Selector" window , select the ESCP then click on "OK".
¹
On "Resource Status Change - Selection" window, select "Permanent reset" option, then click on
"OK".
¹
On the "Resource Status Change - Selection" window, click on "Cancel".
¹
Continue with Step 009.
009
¹
Go to Chapter 4, “3746-900 FRU Exchange” on page 4-1 for the ESCC/ESCP replacement (Change
first the FRU with the highest fault probability).
¹
After FRU replacement, return to the "3746-9x0 Menu".
¹
Click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Options Selection for Maintenance" window, select the "Via the Active CDF-E"
option, click on "OK".
¹
On each of the next "Resource Selector" windows, select the ESCP for concurrent maintenance.
¹
Once the resource is set to concurrent mode a "Maintenance Options" window is displayed.
Is the "Maintenance Options" window displayed?
Yes No
010
Is there an ESCC or an ESCP in your FRU list not yet changed?
Yes No
011
Is there another FRU to test in your FRU list?
Yes No
012
Call support for assistance.
013
Is there any other processor or CS in your FRU list?
Yes No
014
Go to “3746-900 FRU list for exchange” on page 1-55 to change the next FRU.
015
(Step 015 continues)
Chapter 1. START
1-77