IBM FlashSystem 900, Service Manual

Page: 228 / 546

3746-900 FRU Exchange
028 (continued)
Is the diagnostic error free?
Yes No
029
Suspect a FRU that you changed. Restart the procedure.
030
Go to Step 033.
031
¹
Select the "Perform Diagnostics on the resource" option and click on "OK".
¹
A "Test and Running Option Selection" window is displayed with the diagnostics available.
¹
Select the "ARC SAT" and click on "OK".
¹
The "Diagnostic Active Status" window is displayed. Then when the test is complete, an "Information
Message" gives the test result. Click on "OK".
¹
The "Diagnostic Active Status" window is displayed with the number of errors.
Is the diagnostic error free?
Yes No
032
Suspect a FRU that you changed. Restart the procedure.
033
Is there another FRU that you changed to test?
Yes No
034
Go to Step 036.
035
Go to Step 002 on page 1-130.
036
¹
Select "initialize the resource" option and click on "OK".
¹
On the "Warning" window, click on "OK".
Did you put the ESCC in concurrent mode?
Yes No
037
Go to Step 039 on page 1-135
038
¹
Enable the ESCC before removing the ESCC from concurrent mode.
– Simultaneously press the Ctrl/Esc keys.
– On the "Window List" window, double click on the "3746-9x0 Menu" option.
– Click on the "Configuration Management" option.
– Double click on the "Manage ESCON Processors" option.
– On the "ESCP Management Resource Selector" window, select the desired ESCP and click on
"OK".
– The "ESCON Configuration Lines" window is displayed.
– Click on the "Options" (in the action bar). Then select the "Manage ESCC Status" option.
– You obtain the "ESCC Status Management" window.
– Select the "enable" option.
– Click on the "Options" (in the action bar). Then select the "Send request and save" option.
– A "confirmation" window is displayed. Click on "OK".
– A "Warning" window informs you that the ESCP configuration is saved. Click on "OK".
(Step 038 continues)
1-134
3746-900: Service Guide