IBM FlashSystem 900, Service Manual

Page: 335 / 546

3746-900 MAPs
072 (continued)
Is the LIC12 now identified by its name and its line address in the CDF-E?
Yes No
073
Did you change the processor?
Yes No
074
Go to Step 079.
075
Call your support for assistance.
076
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the Active CDF-E"
option and click on "OK".
¹
On the "Resource Selector" window, select the LIC12 and click on "OK".
¹
On the next "Resource Selector" windows, select the LIC12 and click on "OK".
Is the "Maintenance Options" window displayed?
Yes No
077
Go to Step 073.
078
Go to Step 086 on page 2-78.
079
Note
Before continuing this procedure you must be sure that all traffic is stopped on attached processor.
¹
Exchange the suspected processor. Go to Chapter 4, “3746-900 FRU Exchange” on page 4-1.
¹
Wait until the "alarm xxxx FRU unplugged' and 'alarm xxxx FRU plugged' are displayed then continue
with Step 072 on page 2-76.
080
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the Active CDF-E"
option and click on "OK".
¹
On the "Resource Selector" window, select the LIC12 and click on "OK".
¹
On the next "Resource Selector" windows, select the LIC12 and click on "OK".
(Step 080 continues)
Chapter 2. MAPs for FRU Isolation
2-77