IBM FlashSystem 900, Service Manual

Page: 521 / 546

FRU Exchange
CE Leaving Procedure
The maintenance package has determined that
the 3746-900 is ready to be returned to normal
operation.
¹
On the "MOSS-E VIEW" window, double click
on the service processor icon.
¹
The "Service Processor Menu" window is dis-
played.
¹
Click on the "Configuration Management"
option.
¹
Double click on the "Manage Remote Oper-
ations" option.
¹
On the "Remote Operation Management"
window, select the "Remote operations author-
ization" option and click on "OK".
¹
On the "Remote Support Facility" window,
select the two following options:
– "Enable Remote Support Facility"
– "Generate alerts"
and click on "OK".
¹
Click on "Cancel" to return to "Service
Processor Menu", then click on "Function" and
"Exit" to return to the "MOSS-E View" window.
¹
On the "MOSS-E VIEW" window, click on
"Program" in the action bar.
¹
Click on "Log off MOSS-E".
You should use the following list to ensure that the
machine is in suitable condition for customer oper-
ation and that call information is recorded.
1. Replace any cables removed.
2. Do all actions that apply in the following list:
If You Have What You Should Do
Put the 3746-900 offline Put the 3746-900 to online mode.
Been working on the 3746-900 in con-
current maintenance mode on
processors, couplers Use CDF-E display function to check that the replaced/tested
FRUs are available or active.
Been working on the attached 3745 Refer to the appropriate 3745 MIP. Use the following MIP
according to the 3745 model on which the 3746-900 is
attached.
¹
IBM 3745 Communication Controller Models 130 to 17A,
Maintenance Information Procedures, SY33-2070 for
3745 model 17A
¹
IBM 3745 Communication Controller Models 210 to 61A,
Maintenance Information Procedures, SY33-2054 for
3745 model 21A to 61A.
7. Ensure that all latches holding the internal
covers are in the vertical position. This is to
prevent the ESD door rubbers from being
damaged, and to ensure a proper contact with
the machine frame.
8. Replace all covers.
9. Leave the machine in a safe condition.
10. Record the actions taken and the FRUs
replaced during the call. If the origin of the
intervention was an alarm A5 or AA, report as
preventive maintenance (Service Code 08).
11. Update the PMH record for this call.
12. Return parts to the stock room.
Chapter 4. 3746-900 FRU Exchange
4-55