IBM FlashSystem 900, Service Manual

Page: 234 / 546

3746-900 FRU Exchange
010 (continued)
¹
On the "Maintenance Options" window, click on "Cancel" to go back to the "3746-9x0 Menu"
window.
¹
On the "3746-9x0 Menu" window, select the "Configuration Management" option.
¹
Select the "Display/Update Active Configuration (CDF-E).
Are all the resources that you put in concurrent mode available or active now?
Yes No
011
Is there an ESCP or an ESCC not available?
Yes No
012
Call your support.
013
Go to “MAP: 3746-900 ESCC/ESCC2 Enabling” on page 1-144 to enable it then go to Step
009 on page 1-139.
014
Go to Step 015.
015
Have you changed any FRU which appears in the CDF-E?
Yes No
016
Go to Step 026 on page 1-141.
017
Have you changed a processor?
Yes No
018
Go to Step 022 on page 1-141.
019
¹
Go to “3746-900 EEPROM Upgrade” on page 1-155 to perform the EEPROM upgrade. When it is
complete continue here.
¹
Return to the "3746-9x0 Menu" and click on "Problem Management".
¹
Double click on the "Change Resource Status" option.
¹
The "Resource Status Change-Resource Selector" window is displayed. Select the processor that you
have changed and click on "OK".
¹
On the next "Resource Selector" window, click on "OK".
¹
On the "Resource Status Change-Selection" window, select the "IML without diagnostics" option and
click on "OK".
¹
A "Warning" window is displayed saying you that your request is being performed and waiting for its
completion.
Is the "Warning" window saying that your request has been successfully completed?
Yes No
020
Call your support.
021
¹
On the "warning" window, click on "OK".
(Step 021 continues)
1-140
3746-900: Service Guide