IBM FlashSystem 900, Service Manual

Page: 371 / 546

3746-900 MAPs
021 (continued)
¹
Go to Step 022.
022
You need to select again the ARC installed in the LCB
¹
Return to the "Maintenance Options" window and click on "Cancel".
¹
On the "Resource Selector" window, click on "Cancel".
¹
On the "Concurrent Mode Confirmation" window, click on "Leave".
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the Active CDF-E"
option and click on "OK".
¹
On the next "Resource Selector" windows select the ARC of the ARC group which is install in the LCB
and click on "OK".
¹
Go to Step 023.
023
¹
On the "Maintenance Options" window, select the "Perform Diagnostics on the resource" option and
click on "OK".
¹
The "Test and Running Option Selection" window is displayed.
¹
Select the "ARC SAT" and click on "OK".
¹
The "Diagnostic Active Status" window is displayed. When the test is complete an "Information
Message" gives the test result. Click on "OK".
¹
The "Diagnostic Active Status" window is displayed with the number of errors.
Is the diagnostic error-free ?
Yes No
024
Have you already changed this ARC?
Yes No
025
¹
Using the "Cancel" key, return to the "Maintenance Options" window and select the
"Replace the Resource" option.
¹
A "Confirmation" window is displayed.
¹
Go to Chapter 4, “3746-900 FRU Exchange” on page 4-1 for the ARC replacement. After
the ARC replacement, return to the "Maintenance Options" window and continue with Step
023
026
¹
Reinstall in the LCB all the ARCs removed.
¹
Go to Step 032 on page 2-114.
027
Is there another ARC of the suspected ARC group to test?
Yes No
028
Have you already changed an ARC during this procedure?
Yes No
029
(Step 029 continues)
Chapter 2. MAPs for FRU Isolation
2-113