IBM FlashSystem 900, Service Manual

Page: 186 / 546

3746-900 FRU Exchange
MAP: LCEE
001
Is the "Resource Selector" window displayed?
Yes No
002
¹
Return to the "3746-9x0 Menu".
¹
Click on the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Options Selection for Maintenance" window, select the "Via the Active
CDF-E" option, click on "OK".
¹
Go to Step 003.
003
¹
On the "Resource Selector" window, select the line connection box (LCB) for concurrent maintenance.
Then click on "OK".
¹
On the next "Resource Selector" window, click on "OK".
¹
Once the resource is set to concurrent mode a "Maintenance Options" window is displayed.
Is the "Maintenance Options" window displayed?
Yes No
004
¹
Check that the customer stopped traffic on the suspected line connection box.
¹
If APPN/IP is installed, deactivate the ports concerned (refer to “Activate/Deactivate a Resource
Via CCM” on page 1-150), then continue the procedure from here.
¹
Return to the "3746-9x0 Menu".
¹
Select the "Problem Management" option.
¹
Double click on the "Perform Maintenance" option.
¹
On the "Resource Selection Options for Maintenance" window, select the "Via the active CDF-E"
option and click on "OK".
¹
Then go to Step 003
005
Is there a line traffic on ARCs installed in LCBB?
Yes No
006
Go to “MAP: LCPB, LCPE, LCEB, LCEE” on page 1-94
007
¹
On this window, select the "Replace the Resource" option.
¹
A "Confirmation" window is displayed.
¹
Go to Chapter 4, “3746-900 FRU Exchange” on page 4-1 for the LCEE replacement. After the FRU
replacement, continue with the following bullet.
¹
On the "Maintenance Options" window, select the "Initialize the resource" option to reinitialize the FRU
and click on "OK".
¹
Follow the instructions on the "Warning" windows and click on "OK" when prompted.
¹
The "Maintenance options" window is displayed.
¹
Select "Remove the resource from the concurrent mode" and click on "OK".
¹
On the "Warning" window, click on "OK".
¹
On the "Resource selector" window, click on "Cancel".
¹
Return to the "Resource Selection Options for Maintenance" window.
Is a LCPE in your FRU list?
Yes No
008
Go to Step 011 on page 1-93.
1-92
3746-900: Service Guide