IBM Aptiva 2198, Reference Manual

Page: 51 / 186

When working with the Configuration/Setup Utility menu, you must use the
keyboard; the program does not support a mouse. Refer to the following
table for the keys used to accomplish various tasks.
Note: Active keys are displayed at the bottom of each screen; not all of the
above keys are active on every menu.
Exiting from the Configuration/Setup Utility program
When you finish viewing or changing settings, press Esc until you return to
the Configuration/Setup Utility menu. Depending on where you are in the
program, you might have to press Esc several times to get back to the
Configuration/Setup Utility menu. If you want to save the changes or
settings, select Save Settings and press Enter before you exit. Otherwise,
your changes will not be saved.
Keys Function
↑ ↓
Use these arrow keys to move among menu items until the
item you want is highlighted.
← →
Use these arrow keys to display and toggle among choices
for a menu item.
Enter Press this key to select a highlighted menu item.
Esc Press this key to exit from a menu after viewing or making
changes to the settings in the menu.
+
Use this key in some menus to increase the numerical
value of a setting.
−
Use this key (the minus or hyphen key) in some menus to
decrease the numerical value of a setting.
0–9 Use these number keys in some menus to change the
numerical value of a setting.
F1 Press this key for help on a selected menu item.
F9 Press this key if you changed and saved the setting of a
selected menu item and you want to restore the setting
that was active before you made the change.
F10 Press this key to return the setting of a selected menu item
to a default value.
Chapter 4. Configuration/Setup Utility program
29