IBM Aptiva 2198, Reference Manual

Page: 123 / 186

Table 1 (Page 5 of 7). POST error codes
Code Description Action
1762 or
17 Hard disk configuration error 1. Go to Chapter 4, “Using
the Configuration/Setup
Utility program” on page 27
and start the
Configuration/Setup Utility
program. Verify that the
hard disk is enabled and
the configuration for the
drives is correct. If you
change any settings, make
sure you save the settings
before you exit the
Configuration/Setup Utility
program.
2. Make sure the hard disk
cables are correctly
installed and securely
connected to the drives
and system board.
3. If the problem persists,
have the computer
serviced.
178
x
Hard disk or other IDE device
failed 1. Go to Chapter 4, “Using
the Configuration/Setup
Utility program” on page 27
and start the
Configuration/Setup Utility
program. Verify that all
installed IDE drives are
enabled and the
configuration for the drives
is correct. If you change
any settings, make sure
you save the settings
before you exit the
Configuration/Setup Utility
program.
2. Make sure the cables are
correctly installed and
securely connected to the
IDE drives and system
board.
3. If the problem persists,
have the computer
serviced.
Chapter 9. Troubleshooting
101