IBM Aptiva 2198, Reference Manual

Page: 104 / 186

Completing the installation
After working with options, you need to reinstall any removed parts, replace
the cover, and reconnect any cables, including power cords and
communication cables. Also, depending on the option installed, you might
need to update information in the Configuration/Setup Utility program.
The following list is a quick reference to these procedures:
Ÿ
“Replacing the cover and connecting the cables”
Ÿ
“Updating the computer configuration” on page 83
Replacing the cover and connecting the cables
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that
no tools or loose screws are left inside your computer.
2. Clear any cables that might impede the replacement of the cover.
3. Position the cover over the chassis as shown and slide forward. You
might need to lift the front of the cover slightly to align it properly.
4. Insert the three thumbscrews into the holes in the cover and the chassis
and tighten.
5. Reconnect the external cables and cords to the computer.
82
Aptiva Reference Guide