When replacing supplies other than paper, touch only blue parts of the printer.
The blue color indicates that portion of the part that is not hot and is safe to
touch.
Storing Paper and Supplies
Store paper and supplies that you intend to use soon near the printer, both for
convenience and to condition them.
Otherwise, store paper and supplies:
In their original wrappers away from heat or dampness
On a flat surface such as a shelf, but not on the floor
In a closable cabinet for protection and monitoring
Store paper and special-application materials in an area where the temperature and
humidity are similar to the environment where you will use them. Do not exceed the
following requirements:
Temperature
−
10° C to 40° C (14° F to 104° F)
Relative humidity 5% to 80%
Avoid areas with extreme heat or humidity. Extended exposure to extremes can
permanently damage the materials.
To condition InfoPrint 60 supplies, store them in the same environment as the
printer for at least 24 hours before you use them.
For additional information on supplies storage and conditioning, refer to the
Advanced Function Printer: Cut-Sheet Paper Reference for Use with IBM
Electrophotographic Printers.
Display Messages for Supplies
When the life of a consumable is exceeded, a warning message indicates that the
consumable is low or near the end of its life, and IBM recommends that you
replace it. The following occur:
The printer stops printing and becomes NOT READY.
The error beeper sounds (if configured to sound).
A message appears on the operator panel requesting that you replace the
consumable soon. For example, the DEVELOPER MIX: REPLACE SOON
message appears. For toner only, the Toner indicator lights up.
The printer continues printing after you press the Enter key to clear the
message. Press the Start key to make the printer READY.
A warning message appears.
Although a warning message appears to notify you that supplies are low, you may
not see these messages. Another user may clear these messages without notifying
the key operator.
To view outstanding messages regarding supplies, do the following while the printer
is in status mode:
Chapter 6. Maintaining the Printer
6-3
Summary of Contents for 60
