IBM 60, User Manual

Page: 25 / 166

Cancel Print
This key is active only when the printer is receiving or
processing a print job and the printer is in the NOT
READY state.
You can put the printer in the NOT READY state by
pressing the Stop key.
If you press the Cancel Print key when there is nothing
to cancel, the printer executes the can- cellation
procedure anyway. Press the Enter key on the message
CONFIRM CANCEL. CANCEL COMPLETE appears; no
print jobs are affected.
If you press the Cancel Print key when the printer is
running, the PRESS STOP FIRST message is issued
telling you to stop the printer. Press the Stop key. Wait
for the NOT READY message to appear on the display.
Press the Cancel Print key. The PRESS ENTER TO
CONFIRM CANCEL message appears. Press the Enter
key to confirm cancel. The CANCEL COMPLETE
message will be displayed. After the job is canceled at
the printer, the job is deleted from the print queue. This
key also cancels internal print jobs (those originated at
the printer).
A CANCEL COMPLETE message indicates that the print
job has been canceled. To avoid canceling the print job
after pressing the Cancel Print key, scroll to IGNORE
CANCEL, and press the Enter key. The printer continues
as though the Cancel Print key had not been pressed.
Note: To avoid canceling another person's print job,
verify that it is your print job that is printing. After
you press the Stop key, wait until pages are
ejected into the stacker. Check those pages. If
your print job
has not finished printing, proceed to
cancel the print job.
If your print job has finished printing, do not
cancel the print job. This will cancel the next print
job sent to the printer.
Start
Press the Start key to initiate a request for the printer to
change to a READY state. Printing can proceed only
when the printer is READY.
The Start key is inactive when the printer is READY.
Chapter 2. Using the Operator Panel
2-3