IBM 60 User Manual Download Page 42

Page: 42 / 166

Machine Information Items

The machine information includes the following:

Item

Description

Print count
(impressions)

The total number of prints (impressions) run on this printer to the
present date

Code level

The level of IBM microcode loaded in the printer

EC level

Engineering change level (for customer engineers)

OS level

Operating system level (for customer engineers)

Memory (KB)

Number of kilobytes of memory installed on the control unit
system board

Printer type

InfoPrint 60

Serial number

Unique number assigned by IBM to each printer

Manufacturing
plant

Number that designates the manufacturing plant at which the
printer was made

Viewing Machine Information

To view machine information, do the following:

1. Press the Menu/Exit key to enter menu mode.

2. Scroll to the SETUP menu, and press the Enter key. Enter the key operator

password, if prompted.

3. Scroll to MACHINE INFORMATION, and press the Enter key.

4. Scroll to an item you wish to view, and press the Enter key. The read-only

information appears. You cannot change this information.

5. Press the Enter key to return to the submenu item. View the information for

another item by repeating the previous step.

6. Press the Menu/Exit key to exit menu mode.

3-8

InfoPrint 60 User's Guide

Summary of Contents for 60







































































































































































Search results

Summary of Contents for 60

Reviews:

Related manuals for 60

Brands by name

Popular brands

IBM 60, User Manual

Search results

Summary of Contents for 60

Reviews:

Related manuals for 60

Brands by name

Popular brands